82
CS2100
Central control unit
The
CS2100
conference system enables automatic management of
up to a maximum of 100 stations. All the activities can be managed
through a CL2100-G control unit. The available conference modes
through which to manage the system are the 'OPEN', 'MANUAL' and
'AUTOMATIC' modes. Participants wishing to speak can queue to do
so at any time during the discussion. In the MANUAL and AUTOMATIC
modes, speaking is enabled by the operator (in the manual mode) or
on the basis of a pre-set timeout (automatic). Delegate stations are
The
CS2100
unit has a sophisticated digital controller and is able to
manage the sequence of the contributions, electronic voting and the
various different alphanumeric displays in the conference hall. At least
one CL2100-G console is required for configuring the system and the
various control activities (the system can include a maximum of four
of these units).
The central control unit is able to power up to 100 stations, and has six
RJ45 outputs for the various different cascade connections to the mi-
crophone stations, consoles and displays (CAT5e SF/UTP cable). It has
two audio inputs ('MIC' and 'AUX IN') for connecting additional sources
to the conference, such as wired microphones, wireless microphone
receivers or other sources of sound (there is a 12 V phantom power
supply for the 'MIC' input).
There are double 'IN' and 'OUT' sockets for connection to a recorder
with which to record and play back the discussion. On the front panel
there are three separate volume controls (signals from the units, from
the 'TAPE' input and from the 'MIC/AUX IN' inputs). The 'BOOSTER
OUT' (XLR) output can be used for connecting a power unit for sound
broadcasting in the hall.
CS2100 • Conference and voting system
System functional features
• Maximum overall number of stations that can be connected: 100
• Up to 98 Delegate Units: B2100-DG for voting, B2080-DG with no
voting function and B2080-DG for a secretary (Secretary mode)
• Up to2 B2100-PG Chairperson stations
• Management of the conference mode: Automatic (timeout-
based management), Manual (managed by an operator) or Open
(simultaneous management of a plurality of stations)
• Up to a total of 4 control console units (CL2100-G) for system
management
• Management of electronic open voting or secret ballots
• Direct enabling of Delegate stations via the control console
• The Chairperson can speak either in the 'conversation' mode or in
the 'priority' mode
• Easy cascade connections using CAT5 shielded cable
• Up to 6 connecting lines (max 20 units per line, maximum length
of lines from the central unit to the last unit connected: 100 m)
• Up to a maximum of 4 CT 2001 conference hall displays
• RS232 serial connector for connecting a PC (to the central unit or
to the station line using a CSIF2100 interface)
• Connection of additional sources such as wired microphones,
wireless microphone receivers or other sources of sound
• It is possible to connect a recorder for recording and playing back
the discussions
• Connection to a power unit for sound broadcasting in the
conference hall
enabled to speak in the order in which they are queued by the central
unit. At OPEN conferences, all the stations can speak at the same
time. The Chairperson can join a conversation among Delegates or, if
necessary, activate the 'Priority' function, placing all the other stations
on hold. The heart of the system is the CS2100 power supply unit, with
easy cascade connection of the various units by means of 6 lines of
CAT5 shielded cable.
CS2000
|
Conference systems